DH-VO.15.K1 > 1000 – 1500 Kg

DH-VO.15.K1 > 1000 - 1500 Kg

The DH-VO.15.K1 serves the heavy end of the distribution market. It is available with a weight-saving aluminium platform, or a robust steel platform in hot-dip zinc plated finish. In standard configuration, the platform is opened and closed manually. For steel platforms, DHOLLANDIA recommends hydraulic closure to optimize the user comfort [option OVH004]. The basic lift offers maximum all-round efficiency and can be further equipped with numerous value-adding options to adapt the lift to particular applications, such as:

Roll-stops, hinged ramps on 2 or 3 sides
Various types of safety rails, incl. rails offering side access
K9 execution with lifting height above the vehicle floor level
Gas-bottle lifts
Adaption for barn doors

Very versatile lift available with a large choice of value-adding options and extra equipment.
Lift combines maximum operational reliability with a great ease of use.
Reinforced heavy-duty steel columns and cylinder beam, standard in hot-dip zinc plated finish
Weight-saving aluminium platform, or robust heavy-duty steel platform. The steel platform is available in hot-dip zinc plated finish.
Easy to install to the vehicle body. No chassis constraints.

1500

Max Lifting Weight (Kg)

Guarantee (Years)

DH-VO.15.K1 > Specifications

Characteristics

PLATFORM

Weight-saving aluminium platform, or robust heavy-duty steel platform
Fixed leading edge at outboard platform edge [hinged ramps available as an option]
Hydraulic closure available as an option [OVH004], improving the user’s comfort and safety for the operator
Alu platform [OVP002.0]: manual open / close (assisted by torsion bars); hydraulic closure as option [OVH004]
Steel platform: hydraulic closure [OVP001.1 + OVH004] highly recommended; manual open / close [OVP001.B.1] advised against

FUNCTIONAL & MECHANICAL CHARACTERISTICS

Lower beam: operated by 1 single lift cylinder, mounted in a beam at the vehicle floor level, and a set of chains and pulleys
Reinforced heavy-duty steel columns and cylinder beam, standard in hot-dip zinc plated finish
Lifting height to the (1st) loading floor of the vehicle
Lifting above (1st) vehicle floor level available as an option K9 / E9 [OVU013]
Flat platform, level ride
Lift system equipped with mechanical Load Safety Device (chain rupture device)

HYDRAULICAL CHARACTERISTICS

Single acting lift cylinder in the lower beam
Robust pump unit 12V or 24V DC, supplied loose for mounting on the vehicle chassis
Manual emergency operation on all electrovalves

ELECTRICAL CHARACTERISTICS

Exterior control box with main battery isolator switch and removable key [OAE030.BT.0]
Electrical controls without sensitive electronic components
Electric motor with thermal cut-out fuse

FITTING

Columns standard prepared for bolt-on fitting to the rear frame of the body [OVF003.1]
Suitable for bodies with shutter doors, for dropside and flat bed bodies.
With option OVF062 also suitable for closed bodies with barn doors.

FINISH & MAINTENANCE

Low-maintenance bearings in all articulation points
Alu platform or platform sections in natural finish
Lift frame in hot-dip zinc plated or “galvanised” finish.
Best possible protection against corrosion [OVT121.F]

Additional Information

The DH-VO.15.K1 was designed for use by customers operating within the heavy end of the distribution market. The column lift can be purchased with either a lightweight aluminium platform or with a heavier but more robust steel platform with a hot-dip zinc-plated finish for lasting corrosion and use-protection. The lift platform is opened and closed manually in its standard configuration, however, for options making use of steel platforms it is highly recommended that you make use of the hydraulic closure to optimise and ensure that the lift is operated comfortably.

The DH-VO.15.K1 columns are prepared for bolt-on fitting to the rear frame of the truck body as standard. The column lift can be fitted to a wide range of trucks including truck bodies with shutter doors and trucks with dropside or flatbed bodies. The DH-VO.15.K1 can be for closed truck bodies with barn doors as an additional extra option. The column lift offers a maximum carrying weight of between 1000 to 1500 kg.

The DH-VO.15.K1 offers phenomenal efficiency in its standard configuration however the column lift can be further customised with value-adding options to match the buyer’s specific needs, these options include the following: roll-stops and hinged stops can be fitted to either two or three sides of the lift platform for easy loading and unloading of cargo. There are a variety of safety rails that can be fitted to the lift to ensure the safety of the buyer’s staff during loading and unloading. The column lift can also be fitted with rails that offer side access to the lift platform. The DH-VO.15K1 can be fitted with a gas lift which is specifically designed for the loading and off-loading of gas canisters during delivery. Lastly, the column lift can also be adapted for use with barn doors.

Downloads

DH-VO.15.K1 EN