DH-RP.15 > 1000 – 1500 Kg

DH-RP.15 > 1000 - 1500 Kg

The DH-RP.15 1000 – 1500 kg is the top model of 3 lifts forming a young generation of light-weight yet robust fold-away lifts with half-dip platform ride from the vehicle floor to the ground.

In comparison to the DH-RM.20 with level-ride, the DH-RP.15 is a more economical solution for unloading pallets and boxes, general freight and expediting.

The DH-RP.15 is designed for straight trucks up to 26T GVW (excl. refrigerated bodies). In standard configuration, its operation is gravity-down. Power-down (double acting descend) is available as an option for the harshest winter conditions [option OAH025.1]. The DH-RP.15 is available with walk-ramp kit [OAM054].

Clever design offering maximum platform stability and operational reliability, with a minimal proper weight
Easy to fit. Bolted connections possible between lift frame and mounting plates; and between mounting plates and vehicle chassis.
Excellent price-quality ratio.
Available with POWER-DOWN function, and arctic oil (-51°C). Suitable for the coldest winter temperatures.
Lift frame in hot-dip zinc plated or “galvanised” finish. Best possible protection against corrosion [OAT104].

1500

Max Lifting Weight (Kg)

designed for commercial vehicles up to (Tonn)

Guarantee (Years)

DH-RP.15 > Specifications

Characteristics

PLATFORM

Reinforced steel base section with aluminium point, or weight saving full aluminium platform [option OAP601]
The folding and unfolding of the platform are assisted by powerful torsion springs

FUNCTIONAL & MECHANICAL CHARACTERISTICS

Half-dip ride. Progressive platform tilt while lifting / lowering
Alternative available with level-ride and automatic tilt at ground level. See RC.15 and RM.20
Fixed stabiliser rods, platform orientation is only adjustable during installation

HYDRAULICAL CHARACTERISTICS

2 double-acting lift cylinders (Power-down)
Electrical safety valves on all cylinders
Manual emergency operation on all electrovalves
linder piston rods in hard-chromed stainless steel
Cylinders equipped with rubber gaitors and lubrication
Pump unit 12V or 24V DC, accessible on 4 sides for easy maintenance

ELECTRICAL CHARACTERISTICS

Arctic exterior control box with IP67 rated sealed contacts, and a main battery isolator switch with removable key [OAE041.BP]
Electrical controls without sensitive electronic components
Safe exterior controls with compulsory 2-hand operation
Electric motor with thermal cut-out fuse

FITTING

Bolt-on mounting plates for quick and easy fitting [OAM010]
Premounted mounting plates at a fixed center distance [OAM011]
Integrated floor plate for flush mounting available as an option [OAM003 / 004]
Robust bed-extension plate with side ladders available as option [OAM051 + OAM052.LR]
Fixed 3-piece bumper bar available as option [OAF100.ST]
Fixed 3-piece bumper bar + integrated light boxes available as an option [OAF106]

FINISH & MAINTENANCE

Low-maintenance bearings in all articulation points, plus grease nipples
Lift frame in hot-dip zinc plated or “galvanised” finish. Best possible protection against corrosion [OAT104].
Steel base section standard in hot-dip zinc plated finish [OAT127]
Alu platform or platform sections in natural finish

Additional Information

The DH-RP.15 is the top-end model of a new range of truck tail lifts manufactured by Dhollandia. It features a lightweight and sturdy half-dip platform ride that moves between the vehicle floor and the ground, allowing for easy loading and off-loading with little to no restriction. The DH-RP.15 is an efficient fold-away lift with a carrying weight of 1000-1500 kg.

The DH-RP.15 can be compared to Dhollandia’s DH-RM.20 truck tail lift. However, the DH-RP.15 is the more economical solution for loading and off-loading pallets, boxes, general freight and expediting.

The DH-RP.15 is constructed with an inventive design that offers unparalleled platform stability during operations with minimal proper weight. Its design also allows for the tail lift to be easily fitted to trucks with its bolted connections between the lift frame and mounting plates; and between mounting plates and the chassis of the vehicle. The DH-RP.15 features a galvanised finish as well as a galvanised aluminium lift platform that offers thorough protection against corrosion and wear.

The DH-RP.15 truck tail lift was designed for use with straight trucks that have a gross vehicle weight of up to 26 tonnes excluding their refrigerator bodies. Much like the DH-RP.10 the DH-RP.15, it comes pre configured with various operation modes. In its standard configuration, its operation is gravity-down. However, the additional power-down (double acting descend) is available as an additional operation mode which ensures effective use even in the harshest winter conditions.

Downloads

DHRP15