DH-LM.20 > 1500 – 2000 Kg

DH-LM.20 > 1500 - 2000 Kg

The DH-LM.20 is an extremely versatile medium capacity lift, suitable for commercial trucks above 7.5T GVW, trailers and semi-trailers.

This powerful 4-cylinder lift is available with reinforced steel platforms or light-weight aluminium platforms up to 2250 mm. Longer platforms are available in combination with lift type DH-LM.30.

Special applications are available: lifts for truck-trailer combinations with draw-bar (DH-LV), adaptations for trailer-coupling mounted between the chassis beams (arm LMK), for very short overhang (DH-LMP), and for tipper vehicles (DH-KA).

Wedged platform. Level ride with automatic tilt at ground level. Adjustable platform orientation.
Very versatile lift available with a large choice of value-adding options and extra equipment.

2000

Max Lifting Weight (Kg)

Guarantee (Years)

DH-LM.20 > Specifications

Characteristics

PLATFORM

Light-weight aluminium platform, or heavy-duty steel platform
Aluminium platform with profiles oriented in longitudinal direction [type V…], and a cross milled anti-slip protection pattern
Synthetic rollers for the contact between the platform and the ground
Maximum platform depth: 2250 mm (see technical characteristics for detail. Longer platforms possible on DH-LM.30)

FUNCTIONAL & MECHANICAL CHARACTERISTICS

Conical / wedge platform. Level ride with automatic tilt at ground level
Platform tilt adjustable at any position from the exterior controls

HYDRAULICAL CHARACTERISTICS

2 lift cylinders for maximum platform stability
2 tilt cylinders with spring assisted platform opening
Electrical safety valves on all cylinders
Manual emergency operation on all electrovalves
Cylinder piston rods in hard-chromed stainless steel
Cylinders equipped with rubber gaitors and lubrication
Pump unit 12V or 24V DC, accessible on 5 sides for easy maintenance

ELECTRICAL CHARACTERISTICS

Exterior control box with main battery isolator switch and removable key [OAE030.BT.0]
Electrical controls without sensitive electronic components
Safe exterior controls with compulsory 2-hand operation
Electric motor with thermal cut-out fuse

FITTING

Bolt-on mounting plates for quick and easy fitting [OAM010]
Fixed 3-piece bumper bar available as option [OAF100.ST]

FINISH & MAINTENANCE

Low-maintenance bearings in all articulation points, plus grease nipples
Lift frame in hot-dip zinc plated or “galvanised” finish. Best possible protection against corrosion [OAT104].
Alu platform or platform sections in natural finish
Steel platforms to 2000 mm shotblasted and KTL epoxy primed, or in zinc primer at the discretion of DHOLLANDIA.
Steel platforms > 2000 mm in zinc primer.

Additional Information

The DH-LM.20 is among the most versatile medium-capacity lifts and features two lift cylinders as well as two tilt cylinders which offer maximum platform stability during use. Together, they allow the DH-LM.20 to accommodate loads with a maximum load capacity of up to 2000 kg. The DH-LM.20 cantilever lift is perfectly suited for commercial vehicles, trailers and semi-trailers with a gross vehicle weight of up to seven and a half tonnes.

The DH-LM.20 can be purchased and fitted with two different lift platforms. These options include a lightweight aluminium platform or a more heavy-duty steel platform for buyers who operate within more compromising situations. The DH-LM.20 has a conical/wedge platform with a level ride with an automatic tilt at the ground level with additional synthetic rollers for the contact between the base of the platform and the ground. The four-cylinder setup also allows for platform tilt adjustments at any time during the operation of the lift from the exterior control panel.

The DH-LM.20 offers quick and easy installation using bolt-on mounting plates and can be fitted with a host of optional extras ranging from drawbars, and adaptations for trailer couplings that are mounted between the vehicle’s chassis beams to three-piece bumper bars.

Downloads

DHLM20