DH-LM.10 > 500 – 1000 Kg

DH-LM.10 > 500 - 1000 Kg

The 4-cylinder DH-LM.10 has been DHOLLANDIA’s best seller in the light-duty truck range for many years, thanks to its superior stability and performance in comparison to competing 2-cylinder and 3-cylinder lifts, and its excellent price-quality ratio.

This lift is now partially superseded by the DH-LMA.08. But it continues to play an important role: for 1000 kg lift capacity; for platforms above 1800 mm; for vehicles up to 7.5T GVW with a floor height above 1050 mm, and for a number of special executions, such as the half-width lift DH-LMZ.10.

The DH-LM.10 is available with standard bolt-on mounting plates, and quick-fit mounting plates adapted to all popular brands and types of van chassis.

Best-seller in the light-duty range: superior stability and performance.
Wedged platform. Level ride with automatic tilt at ground level. Adjustable platform orientation.
2 lift and 2 tilt cylinders for maximum platform stability
Excellent price-quality ratio.
Very versatile lift available with a large choice of value-adding options and extra equipment.
Lift frame in hot-dip zinc plated (galvanised) finish, or Protection PLUS finish at customer’s choice.

1000

Max Lifting Weight (Kg)

Guarantee (Years)

DH-LM.10 > Specifications

Characteristics

PLATFORM

Light-weight aluminium platform, or heavy-duty steel platform
Aluminium platform with profiles oriented in longitudinal direction [type V…], and a cross milled anti-slip protection pattern
Synthetic rollers for the contact between the platform and the ground

FUNCTIONAL & MECHANICAL CHARACTERISTICS

Conical / wedge platform. Level ride with automatic tilt at ground level
Platform tilt adjustable at any position from the exterior controls

HYDRAULICAL CHARACTERISTICS

2 lift cylinders for maximum platform stability
2 tilt cylinders with spring assisted platform opening
Electrical safety valves on all cylinders
Manual emergency operation on all electrovalves
Cylinder piston rods in hard-chromed stainless steel
Cylinders equipped with rubber gaitors and lubrication
Pump unit 12V or 24V DC, accessible on 5 sides for easy maintenance

ELECTRICAL CHARACTERISTICS

Control unit integrated in cover of pump unit, with main battery isolator switch and removable key [OAE030.BT.P.0]; or compact control unit with 2 toggle-switches (without battery switch) [OAE048.0]
Electrical controls without sensitive electronic components
Safe exterior controls with compulsory 2-hand operation
Electric motor with thermal cut-out fuse

FITTING

Bolt-on mounting plates for quick and easy fitting [OAM010]
Also available with quick-fit mounting plates adapted to the vehicle brand, the wheelbase and overhang [option OAM014]
Fixed 3-piece bumper bar available as option [OAF100.ST]

FINISH & MAINTENANCE

Low-maintenance bearings in all articulation points, plus grease nipples
Lift frame in hot-dip zinc plated or “galvanised” finish. Best possible protection against corrosion [OAT104].
Alu platform or platform sections in natural finish
Steel platforms to 2000 mm shotblasted and KTL epoxy primed, or in zinc primer at the discretion of DHOLLANDIA.
Steel platforms > 2000 mm in zinc primer.

Additional Information

The DH-LM.10 4 four-cylinder cantilever truck lift has been one of Dhollandia’s best sellers in the light-duty truck range for many years. This is due to the DH-LM.10 cantilever lift features having superior stability and performance while competing in a price range that mainly features two-cylinder and three-cylinder lifts, putting it at the top of the price-to-quality list.

The DH-LM.10 cantilever truck lift features a four-cylinder setup with two of the cylinders being lift cylinders, offering maximum platform stability. The other two cylinders are tilt cylinders with a spring-assisted platform opening system. The cantilever lift can feature either a lightweight aluminium platform, or a heavy-duty steel platform. The aluminium platform is cross milled with anti-slip protection to ensure the safety of users when loading and off-loading cargo from the truck. The truck lift also makes use of synthetic rollers for the contact between the lift platform and the ground to mitigate damage during loading and off-loading.

The DH-LM.10 is partially outdated when compared to other cantilever lifts, such as the DH-LMA.08. However, the DH-LM.10 still plays a pivotal role for lifts with a cargo carrying capacity of up to 1000kg and platforms that are over 1800mm in size. This cantilever lift was designed for vehicles with a gross vehicle weight of up to seven and a half tonnes and a floor height of over 1050mm.

The DH-LM.10 comes as standard with bolt-on mounting plates and features fast-fit mounting plates that are adapted to fit all popular brands and types of van chassis. Quick-fit mounting plates can also be adjusted to match the vehicle’s branding as well as the vehicle’s specific wheelbase and overhang. Furthermore, a lightweight 3-piece bumper can be added as an extra upon purchase. The bumper is constructed out of aluminium.

Downloads

DHLM10